护坡模具设计前检讨事项
Review items before slope protection mold design
1．护坡模具材质。
1. Material of slope protection mold.
2．成型品。
2. Formed products.
3．成型机选择。
3. Selection of molding machine.
4．模座基本构造。
4. Basic structure of the mold base.
二、护坡模具浇道系统
2、 Slope protection mold pouring system
1.射出压力较低。
1. The injection pressure is relatively low.
2.快速充填完成，可提升产量。
2. Quick filling completion can increase production.
3.可均匀射出,产品质量较好。
3. It can be evenly sprayed and the product quality is good.
4.减少废物，缩短射出时间。
4. Reduce waste and shorten injection time.
三、成型装备：
3、 Forming equipment:
1.各射出料缸的射出量,决定那1色用那1支料缸。
1. The output of each firing cylinder determines which cylinder to use for which color.
2.打击棒的位置及打击行程。
2. The position and stroke of the striking rod.
3.旋转盘上水路，油路,及电路的配置问题。
3. Configuration issues with water, oil, and electrical circuits on the rotating disc.
4.旋转盘的承载重量。
4. The load-bearing capacity of the rotating disc.
四、护坡模具座设计:模仁配置设计
4、 Slope protection mold seat design: mold core configuration design
首先斟酌到护坡模具公模侧须旋转180度，模仁设置须交叉对称排列，否则没法合模成型。
Firstly, it is necessary to consider that the male mold side of the slope protection mold must be rotated 180 degrees, and the mold core must be arranged in a cross symmetric manner, otherwise it cannot be molded.